Fresh Air is important to indoor air quality (IAQ). All the way back to Benjamin Franklin’s “air baths” and even much earlier in history, we have had some at least vague understanding of the fact that “stale” indoor air can be bad for us and we need to get some fresh air at least once in a while.
In modern homes, windows, doors, insulation , house wraps, roofing and other materials have imporved drastically in the last 40 years and we how have homes and buildings that are getting tighter and tighter. This means that the air outside stays out and the air inside stays in... which is good for efficiency of heating and cooling systems, but not for air quality and overall health. This is why many parts of the world have “fresh air” requirements, meaning simply that they are required to bring in a prescribed amount of outside air in and mix it with the inside air. In the US, a standard callled ASHRAE 62.2 is followed as a guideline for how much outside air in CFM (Cubic Feet per Minute) needs to be brought in based on occupancy & square footage of the home/building. We are not here to discuss the efficacy of the 62.2 because it has some obvious flaws in its sheer simplicity, we just want to show how to apply this method of fresh air but with one additional VERY IMPORTANT feature. We want to simply disable the automatic intake of outside air WHEN the outside temperature is too high or too low. What is too high or too low? This is going to depend on your application including climate, hvac equipment type, home size, your comfort level etc.
NOW AVAILABLE - Ecojay custom Outdoor Temperature Controller
The use of the RANCO temperature controller is no longer necessary with the SmartZone. We now offer a custom outdoor temperature controller that provides MUCH more functionality specific to the SmartZone Fresh Air controls.
High & Low Temperature Limits
Enable/Disable Fresh Air
“Demand” Fresh Air
NEW: Temperature-based Economizer
For more info about this new and exiting product, take a look here:
https://zoningsupply.com/buy/outdoor-air-thermostat
If you are considering Fresh Air or Economizer with your SmartZone-4X, you will want this accessory!
The primary reason for this “ADVANCED FEATURE” is to prevent outside air that is extreemly hot or cold from coming into the house automatically. Use the instructions and diagrams below to install this RANCO ETC-212000 Temperature sensor and you will have the ability to control automatically the temperature range that Fresh Air is allowed to operate. For example , you could set the upper limit to 90 deg F and the lower limit to 30 deg F and then SmartZone will only operate fresh air when the outside temperature is between 30 and 90 deg.
Before this Outdoor Temperature Advanced Fresh Air Feature will work, the SmartZone-4X must be set up for FRESH AIR control. Click the button below to see an application note about basic fresh air. NOTE: Fresh-Air setup instructions can also be found in the SmartZone System Guide