- PRODUCTS - SmartZone
- Direct Damper Controller
Direct Damper Controller
Direct Damper Controller
NEW PRODUCT:
Control a damper directly with a thermostat using this interface board from ECOJAY.
Connect any standard thermostat (24VAC) to the input of this board along with a 24VAC transformer, then connect any 24VAC damper to the output (3-wire dampers recommended)
In normal operation (AUTO), the damper will remain closed unless the thermostat make a “call.” Depending on which wires are connected, the damper will open when the thermostat calls for HEAT, COOL or BOTH. Additionally, the ECOJAY Damper Direct Controller Incudes a manual over-ride switch to easily open the damper any time it’s needed.
NEW PRODUCT:
Control a damper directly with a thermostat using this interface board from ECOJAY.
Connect any standard thermostat (24VAC) to the input of this board along with a 24VAC transformer, then connect any 24VAC damper to the output (3-wire dampers recommended)
In normal operation (AUTO), the damper will remain closed unless the thermostat make a “call.” Depending on which wires are connected, the damper will open when the thermostat calls for HEAT, COOL or BOTH. Additionally, the ECOJAY Damper Direct Controller Incudes a manual over-ride switch to easily open the damper any time it’s needed.
If you have a need to open or close a damper based on room temperature but do not need control of the HVAC equipment, this is the product you have been looking for.